Signal missing. Permanent fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reconnect the connectors, reinstall components etc.
• DSA control module connected.
• Start the engine.
• Depress the accelerator pedal quickly a few times. Release the pedal so that the engine idles each time.
• Switch off the engine.
• Ignition on.
• Read off the position of the throttle position (TP) sensor.

  Fully depress the accelerator pedal several times. Check that the throttle position (TP) sensor position increases and decreases.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the position of the throttle position (TP) sensor OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information