Connecting the breakout box

Fig 1: Identifying Ignition OFF

GLL101045

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Disconnecting Connector

GLL101003

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Disconnect the ABS control module.
Check the control module and the control module connector to ensure that:
The male and female terminals are undamaged and properly attached (cannot be pressed in).

The wiring for the female terminals are securely connected.

Check in particular those terminals that are relevant to the stored diagnostic trouble code (DTC)/symptoms.

Connect adapter 9511426 to the control module connector (wiring side). Connect breakout box 9813190 to the adapter.

NOTE: ABS control module terminals 1-40 correspond to terminals 1-40 on the breakout box.

Fig 3: Breakout Box
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Checking the ground terminal