Intermittent fault

Check the cable between transmission control module (TCM) #A68 (B8) and transmission connector A #22 for an intermittent open-circuit according to Open-circuit, intermittent faults and contact resistance and oxidation according to Contact resistance and oxidation .

HINT: Check solenoid S2 by measuring the resistance between transmission connector #22 and the transmission housing. Resistance should be 12-18 Ω (at 20◦C) 

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the breakout box .
• For information about signals, see Signal description. Transmission control module (TCM) .

Fig 1: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Transmission Connector (Control Module Side) #22

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select Continue when the fault has been remedied. 

• Continue 

  Refer to Information