LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1999 >> C70 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Performance Diagnostic Trouble Code (DTC) Diagnostics - 12 Of 14 (Convertible) >> ECM-918A: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5234T9; B5244T7; 2003-2004) >> Internal fault. Permanent fault >> Programming or replacing the engine control module (ECM)

Programming or replacing the engine control module (ECM)

Fig 1: Identifying Ignition Switch OFF Position
GLL101045Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 2: Identifying Engine Control Module
GLL103038Courtesy of VOLVO CARS OF NORTH AMERICA.

The engine control module (ECM) has registered an internal fault. Replace the engine control module (ECM). See Engine control module (ECM), replacing .

NOTE:

After replacing the engine control module (ECM), the throttle unit must be adapted using the vehicle communication input: "Throttle unit adaptation".

Remedy as necessary.