Engine Performance Diagnostic Trouble Code (DTC) Diagnostics - 11 Of 14 (Convertible)

• ECM-8010: System Relay Output. Faulty Signal. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking the cable
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8010: System Relay Output. Faulty Signal. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-8010: System Relay Output. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Replacing the charging regulator
• ECM-8010: System Relay Output. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-8010: System Relay Output. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-8010: System Relay Output. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Replacing component
• ECM-8010: System Relay Output. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-8010: System Relay Output. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-8010: System Relay Output. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Replacing the cable between system relay terminal 3 and control module terminal A70 (#B10)
• ECM-8010: System Relay Output. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-8010: System Relay Output. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-8010: System Relay Output. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Replacing the cable between system relay terminal 3 and control module terminal A70 (#B10)
• ECM-8010: System Relay Output. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-8010: System Relay Output. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-801A: System Relay. Faulty Signal Or Signal Missing (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-820A: System Relay. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking component
    • Checking power cable
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8400: 5 Volt Power Supply. Signal Too High. Intermittent Fault (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-8400: 5 Volt Power Supply. Signal Too High. Permanent Fault (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Diagnostic trouble code (DTC) status ECM-8400 5 volt power supply. Signal too high
    • Checking charge voltage
    • Signal too high. Intermittent fault
      • Checking cables
    • Information
      • Fault-tracing information
    • Verification
      • Verification
• ECM-8400: 5 Volt Power Supply. Signal Too Low. Intermittent Fault (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-8400: 5 Volt Power Supply. Signal Too Low. Permanent Fault (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Diagnostic trouble code (DTC) status ECM-8400 5 volt power supply. Signal too low
    • Checking cables
    • Signal too low. Intermittent fault
      • Checking cables
    • Information
      • Fault-tracing information
    • Verification
      • Verification
• ECM-8410: 5 Volt Power Supply. Signal Too High. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too High. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too High. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Intermittent fault
• ECM-8410: 5 Volt Power Supply. Signal Too High. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Intermittent fault
• ECM-8410: 5 Volt Power Supply. Signal Too High. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Permanent fault
    • Checking cables
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too High. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Permanent fault
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too High. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Permanent fault
• ECM-8410: 5 Volt Power Supply. Signal Too High. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Permanent fault
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Intermittent fault
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Intermittent fault
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Permanent fault
    • Checking cables
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Permanent fault
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Permanent fault
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Permanent fault
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 1 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
    • Diagnostic trouble code (DTC) status ECM-900E Engine control module (ECM), internal fault. Faulty signal
    • Replacing the engine control module (ECM) and programming
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 10 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 2 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 3 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 4 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 5 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 6 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 7 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 8 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-900E: Engine Control Module (ECM), Internal Fault. Faulty Signal 9 (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-900E
  • Faulty signal 1 - 11
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
    • Checking the wiring and components
    • Faulty communication
      • General information
      • Checking the resistance of the control area network (CAN) cables
      • Checking a short-circuit in CAN cables
      • Checking the traffic load on the CAN cables
      • Identifying fault causes in the CAN network
      • Identifying a control module in the CAN network
      • Verification
    • Information
      • Fault-tracing information
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Permanent Fault (B5234T3; B5244T; 2002)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Permanent Fault (B5234T3; 1999-2001)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Permanent Fault (B5244T; 2000-2001)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901A: Engine Control Module (ECM) Communication. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Too-high: signal/signal missing/too low signal.
• ECM-901E: Engine Control Module (ECM). Internal Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-901E
  • Faulty signal. Permanent fault
    • Replacing engine control module (ECM) and programming
    • Information
      • Fault-tracing information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-901E: Engine Control Module (ECM). Internal Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-901E
  • Faulty signal. Permanent fault
  • Faulty signal. Intermittent fault
• ECM-901E: Engine Control Module (ECM). Internal Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-901E
  • Faulty signal. Permanent fault
  • Faulty signal. Intermittent fault
• ECM-902A: Communication With Throttle Unit. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-902A: Communication With Throttle Unit. Signal Too High/Signal Missing (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-902A: Communication With Throttle Unit. Signal Too High/Signal Missing (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-902A: Communication With Throttle Unit. Signal Too High/Signal Missing (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-902B: Communication With Throttle Unit. Signal Too Low (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-902B
  • Too-high: signal/signal missing/too low signal.
• ECM-903C: Reconfiguration Emission System. Information (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-903C
  • Fault-tracing information
• ECM-903C: Reconfiguration Emission System. Information (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-903C
  • Fault-tracing information
• ECM-903C: Reconfiguration Emission System. Information (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-903C
  • Fault-tracing information
• ECM-903C: Throttle Position (TP) Sensor. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-903F: Throttle Position (TP). Signal Missing (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Fault-tracing information
    • Notes
    • Fault-tracing information
    • Information
• ECM-903F: Throttle Position (TP). Signal Missing. Intermittent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Signal too low or signal missing
    • Frozen values and counter for diagnostic trouble codes.
    • Fault-tracing information
      • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-903F: Throttle Position (TP). Signal Missing. Intermittent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Signal too low or signal missing
• ECM-903F: Throttle Position (TP). Signal Missing. Intermittent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Signal too low or signal missing
• ECM-903F: Throttle Position (TP). Signal Missing. Permanent Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Faulty signal. Permanent fault
    • Frozen values and counter for diagnostic trouble codes.
    • Information
      • Fault-tracing information
    • Fault-tracing information
      • Fault-tracing information
• ECM-903F: Throttle Position (TP). Signal Missing. Permanent Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Faulty signal. Permanent fault
• ECM-903F: Throttle Position (TP). Signal Missing. Permanent Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Faulty signal. Permanent fault
• ECM-904C: Reconfiguration Emission System. Information (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-904C
  • Fault-tracing information
• ECM-904C: Reconfiguration Emission System. Information (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-904C
  • Fault-tracing information
• ECM-904C: Reconfiguration Emission System. Information (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-904C
  • Fault-tracing information
• ECM-904C: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-904C
  • Fault-tracing information
• ECM-904C: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-904C
  • Fault-tracing information
• ECM-904C: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-904C
  • Fault-tracing information
• ECM-904D: ETS Lamp. Information (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-904D
  • Fault-tracing information
• ECM-904D: ETS Lamp. Information (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-904D
  • Fault-tracing information
• ECM-904D: ETS Lamp. Information (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-904D
  • Fault-tracing information
• ECM-9050: Memory Fault In Ram. Internal Fault. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-9050: Memory Fault In Ram. Internal Fault. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Programming or replacing the engine control module (ECM)
    • Information
      • Fault-tracing information
• ECM-9060: Memory Fault In ROM. Internal Fault. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9060: Memory Fault In ROM. Internal Fault. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9070: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9070: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9100: Engine Control Module (ECM). Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking diagnostic trouble codes (DTCs)
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-910E: Throttle Valve. Internal Fault (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-910E
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
  • Faulty signal. Permanent fault
    • Replacing throttle unit and programming
    • Information
      • Fault-tracing information
• ECM-910E: Throttle Valve. Internal Fault (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-910E
  • Faulty signal
    • Diagnostic trouble code (DTC) status ECM-910E Engine control module (ECM), internal fault. Faulty signal
    • Replacing throttle unit and programming
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-910E: Throttle Valve. Internal Fault (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-910E
  • Faulty signal. Intermittent fault
  • Faulty signal. Permanent fault
• ECM-910E: Throttle Valve. Internal Fault (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-910E
  • Faulty signal. Intermittent fault
  • Faulty signal. Permanent fault
• ECM-9117: Throttle Unit. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
      • Adaptation of the throttle unit
      • Checking the fault status
      • Replacing the throttle unit
    • Verification
      • Verification
      • Verification, continued
    • Information
      • Fault-tracing information
• ECM-911A: Throttle Unit Communication. Faulty Communication (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-911A
  • Too-high: signal/signal missing/too low signal.
• ECM-911A: Throttle Unit Communication. Faulty Communication (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-911A
  • Too-high: signal/signal missing/too low signal.
• ECM-911A: Throttle Unit Communication. Faulty Communication (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-911A
  • Too-high: signal/signal missing/too low signal.
• ECM-911A: Throttle Unit Communication. Faulty Communication (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-911A
  • Too-high: signal/signal missing/too low signal.
• ECM-912A: Communication With The Engine Control Module (ECM). Signal Missing (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-912A
  • Too-high: signal/signal missing/too low signal.
• ECM-912A: Communication With The Engine Control Module (ECM). Signal Missing (B5244S; 2000)
  • Diagnostic trouble code (DTC) information ECM-912A
  • Too-high: signal/signal missing/too low signal.
• ECM-912A: Communication With The Engine Control Module (ECM). Signal Missing (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information ECM-912A
  • Too-high: signal/signal missing/too low signal.
• ECM-912A: Communication With The Engine Control Module (ECM). Signal Missing (B5254T; 1999)
  • Diagnostic trouble code (DTC) information ECM-912A
  • Too-high: signal/signal missing/too low signal.
• ECM-913C: Throttle Unit. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking diagnostic trouble codes (DTCs)
      • Checking the status
      • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-913F: Throttle Position (TP). Non Plausible Request (B5234T3; 1999-2002)
  • Non-plausible: request
    • Checking components
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-913F: Throttle Position (TP). Non Plausible Request (B5244S; 2000)
  • Non-plausible: request
  • Diagnostic trouble code (DTC) information
• ECM-913F: Throttle Position (TP). Non Plausible Request (B5244T; 2000-2002)
  • Non-plausible: request
  • Diagnostic trouble code (DTC) information
• ECM-913F: Throttle Position (TP). Non Plausible Request (B5254T; 1999)
  • Non-plausible: request
  • Diagnostic trouble code (DTC) information
• ECM-913F: Throttle Unit. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-914F: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
    • Fault-tracing information
    • Checking the throttle position sensor
    • Information
      • Fault-tracing information
• ECM-914F: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-914F: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-914F: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-914F: Throttle Unit. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-9150: Throttle Position (TP) Sensor 1. Faulty Signal (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Position (TP) Sensor 1. Faulty Signal (B5244S; 2000)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-9150: Throttle Position (TP) Sensor 1. Faulty Signal (B5244T; 2000-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-9150: Throttle Position (TP) Sensor 1. Faulty Signal (B5254T; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-9150: Throttle Unit, Potentiometer 1. Faulty Signal (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too High (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too Low (B5234T9; B5244T7; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9160: Throttle Position (TP) Sensor 2. Faulty Signal (B5234T3; 1999-2002)
  • Diagnostic trouble code (DTC) information ECM-9160