Removal & Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1998 Volvo V90, 1998 Volvo V70, 1998 Volvo S90, 1998 Volvo S70, and 1997 Volvo V90. However, it is still accessible from the selected car via links, so may be relevant.
Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Unplug electrical connector from injector. Remove upper charge air pipe, fuel rail cover, and fuel line clips. Mount Clamps (999 5533 ) on injectors. Press in clamp to ensure it is seated firmly against injector. Screw down adjusting screw until clamping piece is in contact with fuel rail, and tighten another half turn. Push out injector. To install, reverse removal procedure.