Checking remote control function

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
• Establish communication with the RTI system by reading diagnostic trouble codes (DTC) for example. The display should fold up.
• Interrupt communication with RTI control module.
• Do not switch off ignition.

  Try to switch RTI system off with remote control.

  Fig 2: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the display go out? 

• YES 

  FAULT NOT FOUND:  Troubleshooting has been completed.

• NO 

  Refer to Checking remote control function 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Replace batteries in remote control.
• Ignition on.
• Establish communication with the RTI system by reading diagnostic trouble codes (DTC) for example. The display should fold up.
• Interrupt communication with RTI control module.
• Do not switch off ignition.

  Try to switch RTI system off with remote control.

  If the RTI system can be switched off by the remote control, the fault was due to the batteries.

  Fig 2: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the display go out? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Check, connectors and cables