Internal fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition Switch ON Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reinstall the components, reconnect the connectors etc.
• Ignition on.
• Gear selector in position P.
• Activate solenoids S4 and S5 individually.

  Read off the current in the circuit. The current should oscillate between 0 and approximately 1 A.

  Fig 3: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the current oscillate? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information