Signal too low: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Wait for at least 90 seconds.
• Connect the connectors, install the components etc.
• Ignition on.
• Gear selector in position P.
• Activate solenoid S2.

  The value should change between OFF and ON.

  Fig 3: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the value change? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information