Check of TRACS control module: Verification
HINT: After repair, it is necessary to check that the fault has been rectified
- Ignition off
- Reconnect the connections, components etc.
- Ignition on
When the ignition is switched on, the control module activates the TRACS warning light which then goes off after approx. 2 seconds
NOTE:The warning light does not go off if a fault has been registered
Press the TRACS switch and keep it pressed and check that the TRACS warning light is activated
Is the warning light activated ?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Information