Receiver Module Programming

Receiver module must be reprogrammed if a new transmitter is used. When programming receiver, ensure each unique key code is entered. Receiver memory can hold up to 3 transmitter codes.

Before starting reprogramming, ensure remote control transmitter uses same frequency as receiver. Receiver module is marked with a letter, and transmitter has a part number on its case. See RECEIVER & TRANSMITTER IDENTIFICATION .

RECEIVER & TRANSMITTER IDENTIFICATION

Receiver Module Marking	Transmitter Part No.
"A" (9148647)	9148646
"C" (9128710)	9128709
"H" (9128928)	9128927

To reprogram receiver module, turn key to position I or II five times in ten seconds. Leave ignition on after fifth time. Within 30 seconds, press either LOCK or UNLOCK button on transmitter once. Turn ignition off.

NOTE: Transmitters must be reprogrammed within 30 seconds.