Erasing DTCs
- Ensure all stored DTCs have been read. DTCs cannot be erased until all DTCs have been read once and first DTC has reappeared.
- Depress diagnostic button for at least 5 seconds, then release. See Figure . Three seconds after button is released LED will light. While LED is lit press button again. Hold button down for at least 5 seconds and then release. LED will go out. Turn ignition off.
- To ensure DTC is erased, turn ignition on. Press button briefly but firmly. If DTC 111 is displayed, DTCs have been erased. If DTCs have not been erased, repeat procedure.