Specifications Index
940 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM GENERAL SERVICING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | TORQUE SPECIFICATIONS | ||
| Battery | See "BATTERY SPECIFICATIONS" table under CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Service Specifications | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drum Brakes | |||
| Service Specifications | N/A | ||
| Torque | N/A | ||
| Charging | |||
| Generator | GENERATOR SPECIFICATIONS | ||
| Torque | N/A | ||
| Drive Belts | |||
| Adjustment | ADJUSTMENTS | ||
| Drive Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | N/A | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | |||
| Turbo | ENGINE COMPRESSION | ||
| Non-Turbo | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure is 36-85 psi (2.5-6.0 kg/cm2 ) at 2000 RPM with engine at normal operating temperature. Nonadjustable pressure relief valve is located in oil pump housing. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 51 ft.lb (70 N.m) | ||
| Fuel System | |||
| Pressure Specification | 43.5 psi (3.06 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | |||
| Turbo | FUEL PRESSURE | ||
| Non-Turbo | FUEL PRESSURE | ||
| Fuel Filter Location | N/A | ||
| Fuel Filter R & I | N/A | ||
| Ignition | |||
| Turbo | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | Information is not available from manufacturer. | ||
| Ignition Wires (Routing) | N/A | ||
| Non-Turbo | |||
| Firing Order & Cylinder Identification | FIRING ORDER | ||
| Ignition Wires (Resistance) | Information is not available from manufacturer. | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plug | |||
| Turbo | |||
| Bosch | WR7DC | ||
| Gap | .028-.032 In. (.70-.80 mm) | ||
| Torque | 18 ft.lb (25 N.m) | ||
| Turbo | |||
| Bosch | WR7DC | ||
| Gap | .028-.032 In. (.70-.80 mm) | ||
| Torque | 18 ft.lb (25 N.m) | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 63 ft.lb (85 N.m) | ||