LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1995 >> 940 Base, 4D Wagon, AW71 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Turbo >> Self-Diagnostics - Ignition System >> Fault Code Testing - Ignition System >> Code 2-3-4: Throttle Switch Signal

Code 2-3-4: Throttle Switch Signal

  1. Turn ignition off. Connect an ohmmeter between terminal No. 7 (Orange wire) of ignition system ECU connector. Reading should be zero ohms.
  2. Press accelerator pedal slightly to open throttle switch. Reading should be infinite. If resistance is not as specified, check resistance at throttle switch. For throttle switch testing and adjustment, see the SYSTEM/COMPONENT TESTS article.