Draining & Refilling
- Remove drain plug and drain transmission. Disconnect filler tube and remove oil pan.
- Remove and clean oil strainer. Install strainer. Tighten strainer bolts to 18-25 INCH lbs. (2-3 N.m). Install oil pan with new gasket. Tighten bolts to 42 INCH lbs. (5 N.m). Tighten filler tube to 65 ft. lbs. (88 N.m).
- To flush oil cooler, disconnect fluid return pipe from transmission. Place end of pipe in container. Add about 3.5 qts. (3.4L) of fluid in transmission.
- Start engine and let idle. Turn off engine when clean oil comes out of pipe. Connect pipe and fill transmission.