Fuel Pressure Regulator (940)
- Connect Fuel Pressure Gauge (5011 ) between fuel line and fuel rail. Seal free end of hose with Plug (5266 ). Start fuel pumps. Lift out central electrical unit and remove system relay. See Figure .
- Connect a jumper wire between relay terminals No. 30 and 87/2. See Figure . Remove fuses No. 30 and 31. See Figure . Connect a jumper wire between right fuse terminals. See Figure . Fuel pumps should start. Fuel filler cover can be removed to determine whether main pump is operating.
- Fuel pressure should be 42 psi (3 kg/cm2 ). If pressure is too low, pinch return hose by hand and check whether pressure rises. Do not allow pressure to exceed 86 psi (6 kg/cm2 ). If pressure rises rapidly, replace pressure regulator.