LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1992 >> 940 GL, AW70L >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Sensor Rotor >> Installation

Sensor Rotor: Installation

  1. Press new sensor rotor onto hub. Slide sensor rotor onto spindle. Install outer wheel bearing and nut. Torque nut to 42 ft. lbs. (57 N.m) while turning rotor. Loosen nut 1/2 turn. Ensure outer bearing inner race is not stuck. Tighten nut finger tight, then tighten nut to closest hole and insert cotter pin.
  2. Install brake rotor. Install brake caliper using new attaching bolts. Torque caliper bolts to specification. See TORQUE SPECIFICATIONS table. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals