LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1989 >> 760 GLE, AW71 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Testing >> Pump Motor Relay Test >> Pump Motor Relay

Pump Motor Relay

  1. With ECU connector still unplugged, turn ignition on. Connect a jumper wire between terminal No. 28 of ECU connector and ground.
    NOTE: Relay should NOT remain grounded for more than 2 seconds or damage to relay may occur.
  2. Hydraulic modulator should operate while jumper wire is installed. If hydraulic modulator does not function, check wiring from ECU connector to modulator. If wiring is not at fault, substitute a good relay and retest.
Fig 1: ABS Hydraulic Modulator Assembly
G58303Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals