Idle Speed Check
NOTE:
Engine should be warmed up until radiator thermostat open and then for a further 10 minutes.
- Switch off A/C as applicable. Adjust engine speed with idle adjustment screw to 650 rpm. Disconnect ground from test connector. Engine speed should increase momentarily in excess of 1000 rpm, and then stabilize at 750 +/- 20 rpm.
- If the engine speed does not increase when removing ground from test connector, check the following:
- Installation of air valve. Arrow on air valve should point toward intake manifold.
- Voltage supply to air valve.
- Air valve control circuit.
- System with new air valve.