Fuses, Ground Connections & Connectors
- Check ground connections on inlet manifold. Make sure wires are correctly connected and not loose. Poor connections can cause many fault symptoms.
- Check fuses for pump relay and tank pump. The pump relay fuse is an in-line fuse in the engine compartment. There are two of them. The tank pump fuse is fuse no. 4 and is in the fuse box.
- Check the connectors for the air mass meter, air control valve, knock sensor and coolant temperature sensor. Make sure connectors are correctly connected and not loose.
- Make sure that the knock sensor and coolant temperature sensor connectors are not interchanged. The knock sensor wires are green and the coolant temperature sensor wires are yellow.