Mass Airflow Meter: Notes
- Remove rubber sleeve from mass airflow meter to uncover wire connector. Connect voltmeter leads between ground and airflow meter connector terminal No. 5.
- Voltmeter should read battery voltage. Connect voltmeter between terminal No. 5 and terminal No. 1. Voltmeter should again read battery voltage.
- Connect ohmmeter leads to airflow meter connector terminal No. 2 and terminal No. 3. Ohmmeter should read approximately 3.7 ohms.
- Connect ohmmeter between terminal No. 2 and terminal No. 6. Ohmmeter should read 0-1000 ohms.