System Function Check: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1984 Volvo 245, 1984 Volvo 244, 1984 Volvo 242, 1983 Volvo 245, and 1983 Volvo 244. However, it is still accessible from the selected car via links, so may be relevant.
The following tests should be performed if components and circuits checked previously are found to be operating properly. This then verifies that the faults depend on the injection system. If a fault is found, replace the control unit. System function is checked by measuring voltage at injectors under different operating conditions.
NOTE:
Specific meter values are not important. What is important, however, are the changes in meter deflection during different operating conditions.