Using a Test Light
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1984 Volvo 245, 1984 Volvo 244, 1984 Volvo 242, 1983 Volvo 245, and 1983 Volvo 244. However, it is still accessible from the selected car via links, so may be relevant.
- Connect 1 lead of test light to the battery positive terminal or any location where full battery voltage is available. Connect the other lead of the test lamp to each ground terminal.
- The test light should illuminate fully at each terminal. If the test light does not illuminate fully at any terminal, the wire connected to that terminal must be traced and repaired.