LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 1983 >> 760 Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.8L V6 >> Valves >> Valve Guide Servicing

Valve Guide Servicing

  1. Check valve guides for wear. If replacement is necessary, press out old guide using drift tool (5218). Ream hole in cylinder head to oversize class 1 or 2.
  2. Heat cylinder head to 300° F (150° C) and cool valve guides to -95° F (-70° C). Press valve guides into cylinder heat quickly (3-4 seconds, because of high temperature loss.
  3. Using drift tool (5108) for intake or (5109) for exhaust, press in new guides. Using reamer tool (5224), ream guides to .3150-.3158" (8.00-8.02 mm). Check for burrs and be sure valves move freely in guides. Using drift tool (5218), install valve guide seals
scientia non olet · About LEMON Manuals