Overview - Assembly Mounts
WARNING: This page is about a different variant/trim than selected.
- 1 -
Engine Support
- Overview. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 2 -
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 3 -
Engine Mount
- Overview. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 4, 5, 6, 7 -
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 8 -
Pendulum Support
- Overview. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 9, 10, 11 -
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 12 -
Bolt
- In the single and double bolt versions
- Replace after removing
- 60 Nm +90°
- 13 -
Bolt
- Replace after removing
- 60 Nm +90°
- 14 -
Transmission Mount
- Overview. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- 15 -
Bolt
- Replace after removing
- 50 Nm +90°