Windshield Projection Head Up Display Control Module J898, Removing And Installing: Removing

If the control module is replaced, perform the test plan for replacing the windshield projection control module.

-- Perform the "windshield projection head up display control module, replacing" function using the Vehicle Diagnostic Tester. Refer to the appropriate Service Information .

Continuation

-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .

-- Remove the lighting strip. Refer to DYNAMIC LIGHTING STRIP 3 FOR INFORMATION L385, REMOVING AND INSTALLING .

-- Remove the windshield projection cover. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .

-- Move instrument panel noise insulation to the side.

-- Cover the control module -1- with a soft cleaning cloth.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Remove the control module -1-.

-- Disconnect the connectors.

-- Remove the control module -1-.