Shift Mechanism, Removing And Installing: Installing
Install in reverse order of removal. Note the following:
Do not bend or kink the selector lever cable.
Do not lubricate the selector lever cable.
After installation the selector mechanism, the selector lever cable must be checked for ease of movement and adjusted.
-- Install the heat shield under the gearshift mechanism. Refer to MOLDINGS, TRIMS, EXTENSIONS AND TRIM PANELS .
-- Install the driveshaft for AWD vehicles. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
-- Install the rear channel footwell. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN VEHICLE INTERIOR .
-- Install the center console bracket and the center console. Refer to CENTER CONSOLE .
-- Install the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .
-- Check the selector mechanism. Refer to SHIFT MECHANISM, CHECKING .
-- Install the air filter housing.
Gasoline engine
-- Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .