Tightening Specifications

• Refer to OVERVIEW - SUBFRAME
• Refer to OVERVIEW - STEERING GEAR 
• Refer to WHEEL BOLTS TIGHTENING SPECIFICATION
• Pendulum support bolts. Refer to OVERVIEW - ASSEMBLY MOUNTS [CZDA, DGXA, DJXA, CWLA] or OVERVIEW - ASSEMBLY MOUNTS [DKFA, CXDB] .
• Noise insulation bolts. Refer to OVERVIEW - NOISE INSULATION .
• Exhaust system to subframe. Refer to OVERVIEW - MUFFLER [DGXA, DJXA] or OVERVIEW - MUFFLER [DKFA] .

If the steering wheel is still crooked after using the : T10486/1  then an axle alignment is necessary. In this case the record it in the vehicles axle alignment log.