Tightening Specifications

• Refer to OVERVIEW - SUBFRAME
• Refer to OVERVIEW - STEERING GEAR 
• Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS
• Pendulum support bolts. Refer to OVERVIEW - ASSEMBLY MOUNTS (1.4L) or OVERVIEW - SUBFRAME MOUNT (1.8L, 2.0L) .
• Noise insulation bolts. Refer to OVERVIEW - NOISE INSULATION .
• Exhaust system to subframe. Refer to OVERVIEW - MUFFLER (1.4L) or OVERVIEW - MUFFLER (1.8L, 2.0L) .

If the steering wheel is still crooked after using the Locating Pins: T10486/1  then an axle alignment is necessary. In this case the record it in the vehicles axle alignment log.