LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2021 >> Atlas SE R-Line, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Generic Scan Tool (CDVC) (Diagnosis & Testing) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 0A >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions, 2021 My >> Monitor-ID $A3: Misfire Cylinder 2 Data

Monitor-ID $A3: Misfire Cylinder 2 Data

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select "Diagnostic Mode 06: Check / test the results of components that are not continuously monitored".

Select "Monitor-ID $A3".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID DTC Component or System Min. Max. Additional Information
$0B P0302 Misfire Detection 10 Driving Cycles. 0.0 counts 65, 535.0 counts Refer to DTC P0302 in the DTC summary table.Engine/Motor Control Module --, 2021 MY - P0302
$0C P0302 Misfire Detection. 0.0 counts 65, 535.0 counts Refer to DTC P0302 in the DTC summary table.Engine/Motor Control Module --, 2021 MY - P0302

-- If any of the components or systems fail to meet the specified values, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY  to check for stored DTC's or the corresponding diagnostic repair procedure.

-- Switch the ignition off.

scientia non olet · About LEMON Manuals