Selector Lever Cable, Checking And Adjusting: Checking

-- Move the selector lever to >>P<<.

-- Loosen the adjusting screw -arrow- on the selector lever cable -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry the selector lever cable -1- off the selector shaft lever -2- using for example an open end wrench.

-- Move the selector lever from >>P<< to >>S<< and back to >>P<< several times.

• The selector lever and the selector lever cable must have ease of movement at the same time.

-- Install the selector lever cable again.

-- Adjust the selector lever cable. Refer to Adjusting: .

The Selector Lever Cable Must Always Be Adjusted If:

• The selector lever cable was removed from the transmission.
• The engine and (or) transmission were removed and installed.
• Sections of the subframe mount were removed and installed.
• The cable itself or the selector mechanism was removed and installed.
• The engine/transmission position was changed, for example, were installed without tension.