LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2019 >> Atlas SE R-Line, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Generic Scan Tool [CDVC] (3 Of 3) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 0A >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions, 2019 My >> Monitor-ID $3D: Tank Vent Valve Function Check

Monitor-ID $3D: Tank Vent Valve Function Check

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Diagnostic Mode 06: Check / test the results of components that are not continuously monitored".

Select "Monitor-ID $3D".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID DTC Component or System Min. Max. Additional Information
$83 Only Pass CPV Diagnosis With DMTL Quick Pass. 0.08 1.999 Only Pass.
$8C P0496 CPV Diagnosis With DMTL Stuck Open. 0.0 mA 4.204 - 15.406 mA Refer to DTC P0496 in the DTC summary table.Engine Control Module --, 2019 MY - P0496
$8D P0441 CPV Diagnosis With DMTL Stuck Closed. 0.0 mA 3.198 - 36.651 mA Refer to DTC P0441 in the DTC summary table.Engine Control Module --, 2019 MY - P0441

-- If any of the components or systems fail to meet the specified values, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY  to check for stored DTC's or the corresponding diagnostic repair procedure.

-- Switch the ignition off.

scientia non olet · About LEMON Manuals