Overview - Assembly Mounts
- Pendulum Support
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- 60 Nm +90°
- Replace after removing
- Bolt
- 50 Nm +90°
- Replace after removing
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Transmission Mount
- With support arm
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Engine Support
- Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Engine Mount
- With support arm
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
- Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Replace after removing
Transmission with Threaded Insert (for Example Heli Coil) for Attaching the Pendulum Support
NOTE:
There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.
Identifying feature: there is a collar on the first thread -arrow-.
Make sure to use the appropriate bolts and observe the tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS .