Monitor-ID $81: Fuel System
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06: Check / test the results of components that are not continuously monitored".
Select "Monitor-ID $81".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $90 | P219C | air fuel ratio imbalance - out of range high | -99, 998 % | 10, 000 % | Refer to DTC P219C in the DTC summary table. Engine Control Module --, 2019 MY - |
| $91 | P219C | air fuel ratio imbalance - out of range low | -14, 999 % | 99, 995 % | Refer to DTC P219C in the DTC summary table. Engine Control Module --, 2019 MY - |
| $92 | P219D | air fuel ratio imbalance - out of range high | -99, 998 % | 10, 000 % | Refer to DTC P219D in the DTC summary table. Engine Control Module --, 2019 MY - |
| $93 | P219D | air fuel ratio imbalance - out of range low | -14, 999 % | 99, 995 % | Refer to DTC P219D in the DTC summary table. Engine Control Module --, 2019 MY - |
| $94 | P219E | air fuel ratio imbalance - out of range high | -99, 998 % | 10, 000 % | Refer to DTC P219E in the DTC summary table. Engine Control Module --, 2019 MY - |
| $95 | P219E | air fuel ratio imbalance - out of range low | -14, 999 % | 99, 995 % | Refer to DTC P219E in the DTC summary table. Engine Control Module --, 2019 MY - |
| $96 | P219F | air fuel ratio imbalance - out of range high | -99, 998 % | 10, 000 % | Refer to DTC P219F in the DTC summary table. Engine Control Module --, 2019 MY - |
| $97 | P219F | air fuel ratio imbalance - out of range low | -14, 999 % | 99, 995 % | Refer to DTC P219F in the DTC summary table. Engine Control Module --, 2019 MY - |
-- If any of the components or systems fail to meet the specified values, refer to Diagnostic Mode 03: Interrogating Fault Memory to check for stored DTCs or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.