LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Golf R Standard Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Generic Scan Tool [CYFB,DJJA] >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions, 2017 My >> Monitor-ID $3D: Tank Vent Valve Function Check

Monitor-ID $3D: Tank Vent Valve Function Check

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Diagnostic Mode 6: Check test the results of components that are not continuously monitored".

Select "Monitor-ID $3D".

-- Select the desired "Test-ID" or "Hex-ID".

-- Check specified values at idle.

Test-ID DTC Component or System Min. Max. Additional Information
$8B P0441 Tank Vent Valve - Function Check, Test Using Cross-Correlation. 0.1 655.35 Refer to DTC P0441 in the DTC summary table. Engine Control Module --, 2017 MY (P0441)

-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition OFF.

scientia non olet · About LEMON Manuals