Rain/Light Recognition Sensor, Removing And Installing: Removing

-- Remove the interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR .

-- Open the wiring guide on the Rain/Light Recognition Sensor -G397-.

-- Disconnect the connector -A- from the Rain/Light Recognition Sensor -G397- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Not every Rain/Light Recognition Sensor -G397- has the third opening. If this opening is not there, pry it out at another suitable location.

-- Pry the Rain/Light Recognition Sensor -G397- -1- out of the retaining plate -2- at the opening -3- using a suitable flat-head screwdriver.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

While removing, the complete Rain/Light Recognition Sensor -G397- and not just the upper shell of the Rain/Light Recognition Sensor -G397- must be pried off.