Specifications Index
SPECIFICATIONS INDEX
| System | Specification/Procedure | |||
|---|---|---|---|---|
| Air Conditioning | ||||
| Service | CLIMATE CONTROL SYSTEM (SERVICE INFORMATION) | |||
| Torque | ||||
| A/C Compressor Screw | 25 Nm | |||
| Refrigerant Line Screw | 22 Nm | |||
| Axle Nut/Hub Nut | ||||
| Front | 200 Nm + 180° | |||
| Rear | 200 Nm +90° | |||
| Battery | ELECTRICAL SYSTEM (BATTERY & CRUISE CONTROL - GENERAL INFORMATION) | |||
| Brakes | ||||
| Bleeding Sequence | HYDRAULIC SYSTEM | |||
| Disc Brakes | BRAKES TECHNICAL DATA | |||
| Torque | Refer to the appropriate information in BRAKE SYSTEM (SERVICE INFORMATION - HYDRAULIC COMPONENTS) or BRAKE SYSTEM (SERVICE INFORMATION - MECHANICAL COMPONENTS) | |||
| Charging | ||||
| Generator | GENERATOR | |||
| Torque | OVERVIEW - GENERATOR | |||
| Generator Without Bushings | ||||
| Bolt | 23 Nm | |||
| Terminal 30/B+ Nut | 20 Nm | |||
| Generator With Bushings | ||||
| Bolt | 23 Nm | |||
| Terminal 30/B+ Nut | 20 Nm | |||
| Threaded Pin & Nut | 3.2 Nm | |||
| Drive Belts | ||||
| Adjustment | ||||
| 2.0L Gas | CYLINDER BLOCK, BELT PULLEY SIDE | |||
| Belt Routing | ||||
| 2.0L Gas | See the illustration under OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | |||
| Engine Cooling | ||||
| General Service Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | |||
| Radiator Cap Pressure | ||||
| 2.0L Gas | 1.6 to 1.8 bar (23.2 to 26.1 psi) | |||
| Thermostat R & I | ||||
| 2.0L Gas | ENGINE TEMPERATURE CONTROL ACTUATOR -N493-, REMOVING AND INSTALLING | |||
| Water Pump R & I | ||||
| 2.0L Gas | ||||
| COOLANT PUMP, REMOVING AND INSTALLING | ||||
| COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING | ||||
| Engine Mechanical | ||||
| 2.0L Gas | ||||
| Compression | COMPRESSION PRESSURE, CHECKING | |||
| Oil Pressure | OIL PRESSURE, CHECKING | |||
| Idle | 0.85 to 1.6 bar (12.3 to 23.2 psi) | |||
| 2,000 RPM | 1.2 to 1.6 bar (17.4 to 23.2 psi) | |||
| 3,700 RPM | 1.2 to 1.6 bar (17.4 to 23.2 psi) | |||
| Overhaul | ENGINE - ASSEMBLY / ENGINE - CRANKSHAFT, CYLINDER BLOCK / ENGINE - CYLINDER HEAD, VALVETRAIN | |||
| Fluid Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | |||
| Engine Oil Drain Plug | 30Nm | |||
| Flywheel/Flex Plate Torque | 60 Nm + 90° turn | |||
| Fuel System | ||||
| Pressure Specification / Fuel Pressure Test Procedure | ||||
| 2.0L Gas | FUEL PRESSURE, CHECKING | |||
| Ignition | ||||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Ignition Wires | Coil-On-Plug | |||
| Spark Plug | ||||
| 2.0L | 06K 905 601 D | |||
| Starting | ||||
| Starter | STARTER | |||
| Torque | Refer to the appropriate information in OVERVIEW - STARTER | |||
| Wheel Alignment | ||||
| Adjustment Specifications | WHEELS, TIRES, & WHEEL ALIGNMENT (GENERAL INFORMATION) | |||
| Torque | N/A | |||
| Wheel & Tire | ||||
| Wheel Lug Nut Torque | 120 Nm | |||