LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Beetle S, 2D Convertible >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Generic Scan Tool [CPRA,CPPA,CPLA,CPKA] (1 Of 2) (Convertible) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 0A >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions, 2017 My >> Monitor-ID $35: Camshaft Adjustment / V V T Bank 1

Monitor-ID $35: Camshaft Adjustment / V V T Bank 1

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Diagnostic Mode 6: Check test the results of components that are not continuously monitored".

Select "Monitor-ID $35".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID DTC Component or System Min. Max. Additional Information
$80 P0011 Target Error Intake. 0.0° 9.0 - 10.0° Refer to DTC P0011 in the DTC summary table.Engine Control Module --, 2017 MY - P0011
$81 P000A Slow Response Intake. 15.0° 655.35° Refer to DTC P000A in the DTC summary table.Engine Control Module --, 2017 MY - P000A

-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition off.

scientia non olet · About LEMON Manuals