Rearview Camera -R189-, Removing And Installing: Notes

SPECIAL TOOLS AND WORKSHOP EQUIPMENT REQUIRED 

• TORQUE WRENCH 1783 -2-10 NM :VAG1783 

THE REAR VIEW CAMERA AND PIVOTING MOTOR ARE INSTALLED IN INDIVIDUAL HOUSINGS IN THE REAR LID PIVOTING EMBLEM. TO REMOVE THE CAMERA HOUSING, BOTH COMPONENTS AND THE PIVOTING EMBLEM MUST BE REMOVED FROM THE REAR LID FIRST. THEN THE CAMERA HOUSING, THE PIVOTING MOTOR AND PIVOTING EMBLEM CAN BE REMOVED AND THE CAMERA HOUSING CAN BE SEPARATED FROM THE PIVOTING MOTOR. THE CAMERA IS NOT DESIGNED TO BE REMOVED FROM THE CAMERA HOUSING.

• REMOVING AND INSTALLING THE PIVOTING EMBLEM WITH THE REARVIEW CAMERA AND PIVOTING MOTOR FROM THE REAR LID. REFER TO ACTUATOR, REMOVING AND INSTALLING, WITH REARVIEW CAMERA .
• REARVIEW CAMERA HOUSING WITH PIVOTING MOTOR, REMOVING FROM PIVOTING EMBLEM AND INSTALLING. REFER TO REARVIEW CAMERA -R189-, REMOVING AND INSTALLING .
• REARVIEW CAMERA HOUSING, DISCONNECTING FROM THE PIVOTING MOTOR. REFER TO TIGHTENING SPECIFICATIONS .

REARVIEW CAMERA HOUSING WITH PIVOTING MOTOR, REMOVING FROM PIVOTING EMBLEM AND INSTALLING