Engine Mount, Removing And Installing: Installing

Install in reverse order of removal and note the following:

For all repair work, especially in the engine compartment due to the tight working conditions, observe the following:

• Route all wires and lines so that the original path is followed.
• Make sure that there is sufficient clearance to all moving or hot components.

-- Install all the engine mount bolts completely by hand.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts -2 and 3-. The bolt -3- is accessible through the right wheel housing.

-- Align the engine mount -1- so that the distance -a- is the same and is minimum 10 mm.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts -4-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the bracket and tighten the bolts -5-.

-- Check the adjustment of the subframe mount. Refer to SUBFRAME MOUNT, CHECKING ADJUSTMENT .