Cell Phone Operating Electronics Control Module -J412- CONNECTOR ASSIGNMENT
A -
Multi-pin connector, 54-pin
- Terminal 30
- Terminal 31
- Switch on signal
- LF (+) left to Radio -R-
- LF (-) left to Radio -R-
- LF (+) from Control Module for Emergency Call Module and Communication Unit -J949-
- LF (-) from Control Module for Emergency Call Module and Communication Unit -J949-
- LF (+) right to Radio -R-
- LF (-) right to Radio -R-
- Not Assigned
- Telephone Microphone -R38- (+) from RNS
- Telephone Microphone -R38- (-) from RNS
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- CAN Bus high
- CAN Bus low
- Not Assigned
- Not Assigned
- Not Assigned
- LF (+) Right to the Radio - R-, Multimedia Socket MEDIA-IN
- LF (+) Left to the Radio - R-, Multimedia Socket MEDIA-IN
- LF-Ground to the Radio - R-, Multimedia Socket MEDIA-IN
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Cellular Telephone Preparation Control Head -E508-
- Cellular Telephone Preparation Control Head -E508-
- Not Assigned
- Left audio signal from External Audio Source Connection -R199-, AUX IN
- Right audio signal from External Audio Source Connection -R199-, AUX IN
- Audio ground from External Audio Source Connection -R199-, AUX IN
- Audio ground shielding from External Audio Source Connection -R199-, AUX IN
- Not Assigned
- Terminal 30 to Telephone Baseplate -R126-
- Not Assigned
- DIAG signal from Telephone Baseplate -R126-
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Prompt Wire to Telephone Baseplate -R126-
- DIAG signal from Telephone Baseplate -R126-
49 through 54 - not assigned