Cellular Telephone Preparation Control Head

Cell phone operating unit is installed above radio or radio navigation system.

Removing 

Do the following before starting the procedure:

-- Turn off the ignition and all electrical consumers and remove the key.

-- Remove the storage compartment in the instrument panel. Refer to Removal and Installation .

-- Release the locking mechanism -arrow- in the storage compartment housing.

Fig 1: Identifying Locking Mechanism

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the control head from the housing in the -direction of the arrow-.

Fig 2: Pulling Control Head In Out Of Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -A- and guide it out of the housing.

Fig 3: Identifying Housing Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installing 

Make sure that the wire connection routing to the control head is trouble-free inside the storage compartments housing.

Install in reverse order of removal.