Ignition System
- For trouble free operation of the electrical components a voltage of at least 11.5 volts is necessary.
- It is possible that the control module will recognize a malfunction and store a Diagnostic Trouble (DTC) during some tests. After completing all tests and repairs, check the DTC memory and erase it if necessary. Refer to "Guided Function" in the vehicle diagnostic tester.
- If the engine only starts briefly and then turns off again after troubleshooting, repairs or checking of the components, it may be that the immobilizer is blocking the Engine Control Module (ECM). The ECM may have to be adapted then. Refer to "Guided Functions" in the vehicle diagnostic tester.