Telephone Operating Electronics Control Module, Golf Plus Through 05.06

Removing

-- Switch off ignition, switch off all electrical consumers and remove ignition key.

-- Remove right front seat. Refer to Removal and Installation

-- Raise carpet slightly in connector station area. The control module is installed below.

-- Unclip both plastic tabs -arrows-.

Fig 1: Plastic Tabs

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove control module -arrow- with wires connected.

Fig 2: Identifying Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Operate catch -arrow- at red harness connector and disconnect harness connector.

Fig 3: Identifying Catch At Red Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press catch -A- on black harness connector and fold the bracket over in direction of arrow -B-.

Fig 4: Identifying Catch On Black Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect electrical connection.

Installing

Install in reverse order of removal.