Test-ID 09: Engine Coolant Temperature (ECT) Sensor -G62- (vehicles with engine code BJS)

WARNING: This page is about a different variant/trim than selected.

Test requirements

There must not be any DTCs stored in DTC memory. Refer to Diagnostic mode 3: Check DTC Memory
Coolant temperature must be at least 80 ° C. Refer to Diagnostic mode 1: Check measured values

Work procedure

Read readiness code. Refer to Readiness code, reading
Let engine run at idle.
Under address word 33, select "Diagnostic mode 6: Check test results of components that are not continuously monitored".
Select the "Test-ID 09: Engine Coolant Temperature (ECT) sensor".