Replacing Multi-Function Transmission Range (TR) Switch -F125- (vehicles with 01M transmission)
NOTE:
Multi-function switch is located at rear on transmission.
- Disconnect connector from Multi-Function Transmission Range (TR) Switch -F125-.
- Remove mounting bolt and retainer.
- Remove Multi-Function Transmission Range (TR) Switch.
- Replace O-ring.
Installation is performed in the reverse order of removal.
- Tighten bolt to 10 Nm.
- Erase DTC memory of Transmission Control Module (TCM). Refer to Diagnostic mode 4: Reset/erase diagnostic data
- Generate readiness code. Refer to Readiness code, generating