LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> EuroVan Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Diagnosis >> Locations Of Electrical/Electronic Components >> Multi-Function Transmission Range (Tr) Switch -F125- >> Removing And Installing Multi-Function Switch

Removing And Installing Multi-Function Switch

Pull connector off multi-function switch.

Remove bolt and retainer.

Place drip tray under the transmission.

Remove multi-function switch.

Always replace O-ring.

Installation is performed in the reverse order.

Tighten bolt to 10 Nm (89 Inch lbs.)

Check ATF level and top off. See SERVICING - A/T article.

scientia non olet · About LEMON Manuals