LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1992 >> Fox Base, 1.8 A >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Installation

Fuel Pump: Installation

  1. Lubricate new "O" ring with fuel and install over fuel pump. Ensure fuel pump filter screen is clean. Install pump in fuel reservoir. Secure retaining ring with 3 screws. Tighten screws evenly. Ensure fuel pump is correctly seated.
  2. Reconnect fuel line and harness connector. Use new sealing washers and hose clamps as required. On CIS, CIS-E and CIS-E Motronic models, tighten cap nut to 15 ft. lbs. (20 N.m). Reconnect battery ground terminal, start engine and check for leaks.
scientia non olet · About LEMON Manuals