Centering Sensor Plate & Lever
- Check sensor plate for centered position in airflow sensor housing. See Fig 1
. If plate binds on housing or is off-center, remove 6-mm bolt holding plate to lever. Coat bolt with locking compound and install finger tight.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- Use Centering Gauge (US 1109) or .004" (.10 mm) feeler gauge to set plate an equal distance from sensor housing. If plate cannot be centered, remove airflow sensor housing.
- Turn housing upside-down and remove counterweight-to-sensor lever bolt. Coat bolt with locking compound and install finger tight. Center sensor plate lever in housing and tighten bolt. Complete centering of plate.