LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 1990 >> Vanagon Syncro >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Removal & Installation >> Distributor (Cis Systems) >> Installation

Distributor (Cis Systems): Installation

  1. Align oil pump drive pinion lug parallel to crankshaft. Set rotor pointing toward mark made when distributor was disengaged from drive gear.
  2. Install distributor. Rotor should now point to mark made for No. 1 cylinder in distributor firing sequence. Align mark for distributor housing and install distributor hold-down clamp and bolt. Install distributor cap. Check timing. Tighten hold-down bolt to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals